James Hardie recommends using stainless steel finish nails when installing HardieTrim products. Use a 2 in. finish nail to fasten trim together. Longer finish nails may bend.
Error message | View complete answer on https://www.jameshardiepros.com
What size finish nails for Hardie trim?
Use a 50mm (2″) finish nail to fasten trim together. Longer finish nails may bend. INSTALLATION INSTRUCTIONS MAY LEAD TO SERIOUS PERSONAL INJURY OR DEATH. HardieTrim board is a decorative non-load bearing trim product.
Error message | View complete answer on https://www.jameshardiepros.com
Can you use 16 gauge nails on Hardie?
Replacing rotted out exterior wood trim with Hardie cement fiber trim boards and have found from previous work that best way to install is with nail gun and stainless steel 16 gauge nails.
Error message | View complete answer on https://www.amazon.com
What screws to use for Hardie trim?
Cement screws are most commonly used for James Hardie siding, and they also apply to fiber cement roofing trim and flooring tile in kitchens and bathrooms.
Error message | View complete answer on https://allpointsfasteners.com
Is it better to nail or screw Hardie board?
James Hardie prefers and recommends installation of HardiePlank® lap siding by the blind nailing technique, such that fasteners are hidden by the course above.
Error message | View complete answer on https://www.jameshardie.com
Can I use a finish nailer on Hardie siding?
The answer is, yes. Framing nail guns can be used for siding installation, if the nail being used is long enough to attach the siding firmly to your exterior wood sheathing. While it’s recommended to always use a siding nail gun for siding installation, in a pinch, you may be able to use a framing nailer instead.
Error message | View complete answer on https://www.nailgundepot.com
What size nail gun for Hardie siding?
Coil Nailer Siding / Fence Hardie Board Nail Gun 2 1/2″ Inch 15 Degree (RECON)
Error message | View complete answer on https://www.amazon.com
What’s the best way to attach Hardie board?
James Hardie products can be hand nailed or fastened with a pneumatic tool. Pneumatic fastening is highly recommended. Set air pressure so that the fastener is driven snug with the surface of the siding. A flush mount attachment on the pneumatic tool is recommended.
Error message | View complete answer on https://www.jameshardiepros.com
Is it OK to nail into Hardie board?
For Hardie siding, it’s recommended to use stainless steel or hot-dipped galvanized nails. You can either nail by hand or use a pneumatic nailer. However, it’s best to use a pneumatic nailer for speed and consistency. At the bottom, the siding should be face nailed, and at the top, it should be blind nailed.
Error message | View complete answer on https://legacyusa.com
Can you install Hardie board with screws?
Cement Board Screws are designed for attaching HardieBacker or equivalent fiber cement backerboard to wood or light gauge steel studs. Backer-On’s patented serrated head design countersinks for flush seating at any angle, providing a smooth surface for tile.
Error message | View complete answer on https://www.homedepot.com
What gauge nails for Hardie trim?
Use 50 mm (2 in) minimum 16 ga. finish nails to attach HardieTrim boards to wood frame construction.
Error message | View complete answer on https://www.jameshardiepros.com
What kind of nails to use for hardiplank?
NAIL TYPE: Fasteners must be corrosion resistant, galvanized or stainless steel. Electro-galvanized nails are acceptable for use with James Hardie Siding Products, but may exhibit premature corrosion. James Hardie recommends the use of quality, hot-dipped galvanized nails.
Error message | View complete answer on https://www.structuretech1.com
Can you use a nail gun on Hardie board?
You can shoot Hardie siding on with air powered nailers or use hand driven roofing nails to attach siding to the home or structure. The nails can be ringed- shanked or smooth just make sure you are hitting the studs in the wall.
Error message | View complete answer on https://www.exteriorproinc.com
What kind of nails to use on cement siding?
Galvanized or stainless steel 6D and 8D nails are typically considered the best nails for fiber cement siding because they are the appropriate size and offer reliable durability.
Error message | View complete answer on https://allurausa.com
